FLAVOURS AND FLAVOUR ENHANCERS

PROMEL solutions that deliver the flavour ripening alone cannot provide in processed cheese, sauces, snacks and dairy products through EMC and cheese-type flavourings, and ensure season-independent colour consistency with β-carotene and chlorophyllin.

Key technological challenges in flavour and colour

The flavour of natural cheese develops over months of ripening through proteolysis and lipolysis products. A plant producing processed cheese, cheese sauce, analogue cheese or cheese-based snacks, however, works with raw materials such as young cheese, butter, milk powder or vegetable fat without waiting for that maturation. The challenges typically encountered in this scenario include:

  • Flat, "milky" flavour with weak character in products made from young raw materials
  • Loss of cheese perception in formulations with reduced cheese content or containing vegetable fat
  • Loss of volatile flavour compounds during high-temperature steps such as processing and UHT treatment
  • Colour variation depending on the season of the raw material — yellow in summer milk, near-white in winter milk
  • Time, cost and batch-to-batch inconsistency of traditional kiln smoking

Solution approach

Aroma is one of the most important components of flavour in food products; the correct approach is to build body, character and top notes separately rather than relying on a single intense flavouring.

Enzyme-modified cheese (EMC)

EMC is produced by slurrying cheese or curd with water and incubating it under controlled conditions with proteases, peptidases, lipases and esterases. Lipolysis releases short-chain free fatty acids (such as butanoic and hexanoic acid) that contribute characteristic sharpness, while proteolysis liberates peptides and amino acids carrying brothy and umami notes. Once the target profile is reached, the enzymes are heat-inactivated. Because the resulting concentrate can carry flavour intensity up to several tens of times that of natural cheese according to published literature, it is used at low inclusion rates in the formulation. Lipase selection determines the profile: sheep cheese-type notes and cheddar-type sharpness are achieved with different enzyme combinations.

Cheese-type flavourings and smoke flavouring

Cheese-type flavourings target the characteristic compounds of a specific cheese variety (gouda, tulum, cheddar); when used together with EMC, the EMC provides body while the flavouring delivers the recognisable character. Smoke flavourings are obtained by condensing and refining wood smoke; they contribute both aroma and smoked colour and can be applied to the mass or to the surface.

Food colours

Beta-carotene (E160a) is oil-soluble; the oil-soluble form is preferred for products with a fat phase, while a water-dispersible emulsion form is used in cheese milk and water-phase-dominant products. Chlorophyllin is water-soluble and used for green shade adjustment; its tendency to precipitate in acidic conditions must be taken into account during formulation.

PROMEL product groups

  • Enzyme-modified cheeses (FP000081 (EMC) Flavouring Cheddar Type, EMC Sheep Flavoring) — intense cheddar and mature sheep cheese character in paste form
  • Cheese-type flavourings (Fla-Pro Tulum Aroması, Promel Gouda Aroması) — tulum and gouda profiles for processed cheese applications
  • Powdered cheese flavouring (Flapo Cheddar Flavour) — for dry blends, seasonings and powder sauce premixes
  • Smoke flavouring (Promel Smoke Flavour 10E) — flavour and colour for smoked cheese and meat products
  • Food colours (Promel Beta Carotene 30%, Promel Beta Carotene EM 5%, Promel Chllorophill) — yellow-orange and green shades

Selection by end product

End productPrimary needRecommended approach
Processed cheese, processed cheese trianglesMature cheese characterEMC combined with cheese-type flavouring
Cheese sauce, burger cheeseIntense cheddar taste and orange shadeCheddar-type EMC with beta-carotene
Snack seasoning, powder sauceHomogeneous distribution in dry blendsPowdered cheese flavouring
Smoked cheeseSmoke flavour and surface colourSmoke flavouring, mass or surface application
Herb cheese, flavoured fermented productGreen shade adjustmentChlorophyllin

Process and formulation tips

  • Adding volatile flavourings towards the end of the processing or cooking cycle reduces losses; EMC in paste form can be added early along with dry ingredients for homogeneous distribution.
  • Dosage typically ranges from a few per mille to a few percent; the common industry range for EMC is approximately 0.25–3%.
  • Salt, acidity and fat content affect flavour perception; dosage trials should be conducted at the salt and pH levels of the final product.
  • Beta-carotene is sensitive to light and oxygen; opened packaging should be resealed tightly and pre-solutions should not be left standing.
  • Sensory evaluation should also cover end of shelf life; some notes intensify or fade during storage.

Frequently asked questions

What is the difference between EMC and a flavouring?

EMC is a cheese product whose flavour has been intensified by enzymes, and it provides the body of the flavour; a flavouring is an aroma preparation targeting a specific profile. Their labelling classifications differ, so they are not interchangeable but rather complementary.

Can the label state "natural flavouring"?

This depends on the classification of the product under the Turkish Food Codex Flavourings Regulation and is determined according to the product documentation. Smoke flavourings cannot be labelled as natural flavourings; for export products, the current EU smoke flavouring list must also be checked.

Can food colours be used in every cheese?

No. The Food Additives Regulation restricts food colours in cheese categories to specific conditions; the category of your product must be verified before use.

To build the flavour profile to match your target cheese type, fine-tune EMC and food colour dosage at pilot scale and carry out sensory benchmarking, you can work with the Technofood technical team and request samples for your trials.

Products for this Application

Promel Beta Carotene %30 – Oil-Soluble Food Colour

PROMEL BETA CAROTENE 30%

Concentrated oil-soluble food colour containing 30% β-carotene (E160a); imparts yellow to orange shades in fat-phase products such as processed cheese, analogue cheese, butter and margarine.

View →

FLA-PRO TULUM FLAVOUR

A cheese flavouring developed to enhance the finesse of processed tulum cheese and capture the sharp, mature character of traditional tulum.

View →
Promel Gouda Aroması – Gouda-Type Cheese Flavouring

PROMEL GOUDA Flavour

A Gouda-type flavouring used to impart the sweet, nutty and buttery mature character of Gouda cheese to processed cheese, semi-hard cheese and cheese-based products.

View →
FP000081 EMC – Cheddar-Type Enzyme-Modified Cheese

FP000081 (EMC) FLAVOURING CHEDDAR TYPE

FP000081 is a cheddar-type enzyme-modified cheese (EMC) in paste form. It delivers intense cheese flavour at low dosage in cheddar cream cheese, processed cheese triangles, burger cheese and cheese sauces.

View →
Promel Smoke Flavour 10E – Smoke Flavouring and Colour

Promel Smoke Flavour 10E

Smoke flavouring used to impart both a smoky aroma and characteristic smoked colour to dairy and meat products; suitable for mass incorporation and surface application.

View →
Flapo Cheddar Flavour – Powdered Cheddar Cheese Flavouring

FLAPO CHEDDAR FLAVOUR

A powdered cheese flavouring obtained from Cheddar cheese by spray drying; delivers Cheddar taste in dry blends, snack seasonings and powdered sauce premixes.

View →
EMC Sheep Flavoring – Sheep's Cheese EMC Flavouring

EMC SHEEP FLAVORING

Sheep cheese-based enzyme-modified cheese (EMC) flavouring. Used to impart a mature sheep cheese and tulum-type character to cow's milk or analogue cheese-based products.

View →
Promel Beta Carotene EM 5% – Water-Dispersible Food Colour

Promel BETA CAROTENE EM 5%

Water-dispersible emulsion containing 5% β-carotene (E160a); added directly to cheese milk, sauces, ice cream and water-phase-dominant dairy products to impart yellow to orange colour.

View →
Promel Chlorophyllin – Green Colour for Dairy Products

PROMEL CHLOROPHYLLIN

Water-soluble liquid chlorophyllin food colour; used to impart and adjust green shades in ice cream, flavoured fermented milk products and herb/spice cheeses.

View →

Would you like more information about our products?

Contact us