Promel Beta Carotene EM 5% – Water-Dispersible Food Colour
Technofood089

Promel BETA CAROTENE EM 5%

Water-dispersible emulsion containing 5% β-carotene (E160a); added directly to cheese milk, sauces, ice cream and water-phase-dominant dairy products to impart yellow to orange colour.

Product description

Promel Beta Carotene EM 5% is a water-dispersible emulsion food colour containing 5% β-carotene (E160a). β-carotene is inherently oil-soluble; in the emulsion form, the β-carotene dissolved in the oil phase is dispersed into the water phase as very fine droplets stabilised by an emulsifier system. This allows the product to be added directly to water-based systems without the need for prior dissolution in an oil phase.

Unlike the 30% oil-soluble form in the same product family, EM 5% is designed for applications where the water phase is dominant, such as cheese milk, aqueous sauces, ice cream mixes and fermented milk products.

Technical function and working principle

The colour delivered by emulsified β-carotene depends on droplet size and concentration: smaller droplets produce brighter yellow hues, while larger droplets and higher dosages yield more orange tones. Because the pigment is homogeneously distributed in the water phase, even low dosages give uniform colour.

In cheese production, when the emulsion is added to the cheese milk (before renneting), a significant proportion of the β-carotene droplets are retained in the curd together with the milk-fat globules and the casein network. Literature reports that β-carotene preparations can bring cheddar cheese colour from winter-milk levels up to summer-milk levels, with only trace amounts migrating into the whey. This characteristic offers an advantage over annatto in operations where keeping the whey white is important.

Applications

  • Colour standardisation of hard and semi-hard cheeses by addition to cheese milk
  • Processed cheese, spreadable cheese and cream cheese
  • Cheese sauces and ready-to-use aqueous sauces
  • Ice cream and dairy desserts
  • Fruit-flavoured and flavoured fermented milk products
  • Analogue cheese and plant-based cheese alternatives

Key benefits

  • Direct addition to the water phase; no prior dissolution in oil required
  • High retention in the curd when added to cheese milk, with minimal colour migration into whey
  • Compensation for seasonal milk colour variations (summer/winter milk), ensuring year-round colour consistency
  • Homogeneous, streak-free colour distribution even at low dosages

Usage and dosage

Dosage is determined by the target colour and the fat content of the product; the standard industry approach for food colours is incremental dosage trials against a reference colour sample. Product-specific dosage is provided in the technical data sheet (TDS).

  • Shake the container well before use.
  • In cheese production, dilute the emulsion with a small amount of milk or potable water and add it to the cheese milk before rennet addition, ensuring thorough mixing. Do not add at the same time or at the same point as calcium chloride.
  • In processed cheese and sauces, the emulsion can be added to the cooker together with the water.
  • In acidic products, emulsion stability should be verified by pilot trial.

Optimum dosage should be established through pilot trials based on the raw materials and formulation. Usage must comply with the conditions set for the relevant food category in the Turkish Food Codex Food Additives Regulation.

Technical specifications

ParameterValue
Active ingredientβ-carotene (E160a), 5%
FormEmulsion, water-dispersible
AppearanceOrange-brown to orange-red liquid
OdourMild
pH3–7
Boiling point> 100 °C
AntioxidantContains tocopherol

Packaging and storage

Store in a tightly sealed, light-proof container in a cool location. Avoid exposure to light, heat and oxidising agents. The emulsion should not be subjected to freezing. Wearing gloves during handling is recommended.

Frequently asked questions

What is the difference between EM 5% and 30% β-carotene?

EM 5% is a water-dispersible emulsion and is added directly to the water phase, whereas the 30% product is oil-soluble and requires pre-dissolution in the oil phase before use. EM 5% is preferred for cheese milk, sauces and ice cream; the 30% form is suited to butter, margarine and products with a pronounced oil phase.

How much of the colour is retained in the curd when added to cheese milk?

β-carotene binds strongly to milk fat and the curd; migration into the whey is significantly lower than with annatto. The exact retention rate varies with milk fat content, curd processing conditions and dosage, and should be verified during pilot production.

Can it be used in white brined cheese?

The use of food colours in white brined cheese is restricted by regulation. Before use, verify whether the relevant product category permits food colours under the Turkish Food Codex.

To match the target colour in your product against a reference sample, contact the Technofood technical team for sample and colour trial support.

Would you like more information about our products?

Contact us