
PROMEL BRINEMIX
Promel Brinemix is a powder additive that regulates the mineral and pH balance of brine in brined cheeses, helping to prevent softening, dissolution, slipperiness and gelation on the cheese surface.
Product description
In white brined cheese, feta-type and other brine-ripened cheeses, brine is not merely a source of salt but an active medium in constant material exchange with the cheese. When the brine composition is not in equilibrium with the cheese, calcium and protein migrate from the cheese surface into the brine; the surface softens, becomes slippery, dissolves and the brine turns turbid.
Promel Brinemix is a brine additive specifically formulated to address these issues. It contains sodium phosphates (E339), sodium lactate (E325), magnesium chloride (E511) and calcium chloride (E509). It is a white powder that dissolves readily in brine.
Technical function and working principle
Cheese protein is a paracasein network held together by calcium bridges. In freshly prepared brine consisting only of salt and water, no calcium is present; consequently, calcium migrates from the cheese surface into the brine along the concentration gradient. In the surface layer that has lost its calcium, the casein network loosens, absorbs water and softens; in advanced cases the surface dissolves and the brine takes on a milky appearance. This process is accelerated when the brine pH differs significantly from the cheese pH.
Brinemix establishes this equilibrium through four components:
- Calcium chloride (E509) supplies dissolved calcium to the brine, preventing calcium extraction from the cheese and keeping surface proteins bound.
- Magnesium chloride (E511), as a divalent cation, supports the ionic balance together with calcium.
- Sodium phosphates (E339) create a buffering effect in the brine, limiting sudden pH shifts.
- Sodium lactate (E325) creates an environment close to the cheese's natural lactate content, contributing to pH buffering and improving the compatibility of the brine with the cheese.
As a result, the brine reaches ionic and acidity equilibrium with the cheese more rapidly; surface texture is preserved and the brine remains clear for a longer period.
Applications
- White brined cheese and feta-type brine-ripened cheeses
- Cheeses ripened in brine in tin or plastic packaging
- Halloumi and other cheeses stored in brine
- Short-duration brine baths for cheeses (salting tanks)
Benefits
- Reduced surface softening, slipperiness and dissolution
- Reduced brine turbidity and sediment formation
- Better preservation of cheese block edges and corners, resulting in a more uniform appearance
- More stable texture throughout storage and transport
- A more balanced mineral and pH environment compared to adding calcium chloride alone
Usage and dosage
Brinemix is added to the water together with salt during brine preparation and stirred until fully dissolved. The brine is then pasteurised or filtered and cooled to the working temperature. The brine pH should be controlled to remain close to the cheese pH (typically in the 4.5–4.8 range for white brined cheese); brine salt concentration typically ranges from 6 to 14 per cent depending on the cheese type.
In reused brines, calcium levels and pH change over time, so regular analysis and replenishment with Brinemix is recommended. Brine hygiene (filtration, pasteurisation) is also important for preventing spoilage caused by moulds and yeasts. The optimum dosage should be determined through pilot trials based on cheese type, salt concentration and brine management practices.
Technical specifications
| Parameter | Value |
|---|---|
| Appearance | Powder |
| Colour | White |
| Odour and taste | Free from foreign odour |
| Components | E339, E325, E511, E509 |
| pH | 4.5 – 6.5 |
| Loss on drying | Max. 15% |
| Shelf life | 24 months from date of manufacture |
Packaging and storage
Store in a cool, dry place in its sealed original packaging. As calcium and magnesium chloride are hygroscopic (moisture-absorbing), opened packages must be resealed tightly.
Frequently asked questions
Is adding calcium chloride alone not sufficient?
Calcium chloride is the primary tool for preventing calcium loss, but it does not buffer the brine pH. Brinemix delivers calcium together with magnesium, phosphate and lactate, targeting both ionic balance and pH stability.
What should I check if my cheese still softens in the brine?
Common causes of surface softening include a brine pH higher than the cheese pH, low brine salt concentration, and insufficient acidification or excessive moisture in the cheese. These parameters should be evaluated together.
Does Brinemix affect the taste of the cheese?
No noticeable taste effect is expected at the recommended dosages; however, since excessive calcium chloride may impart a slight bitterness, the dosage should be determined through pilot trials.
Technical support
For evaluation of your brine analyses, determination of the Brinemix dosage and brine management programme, and sample requests, please contact the Technofood technical team.
