
Promel Smoke Flavour 10E
Smoke flavouring used to impart both a smoky aroma and characteristic smoked colour to dairy and meat products; suitable for mass incorporation and surface application.
Product description
Promel Smoke Flavour 10E is a smoke flavouring used to impart smoky aroma and smoked colour to dairy and meat products. Smoke flavourings are produced from primary products obtained by condensing and purifying the smoke generated through the controlled combustion of hardwood sawdust, delivering the sensory result of traditional smoking via a more controlled process.
The product's key feature is its dual contribution of flavour and colour: when applied to the surface and subsequently subjected to heat treatment, it develops the characteristic golden-brown surface colour associated with smoked cheese and smoked meat products.
Technical function and working principle
The colouring effect of the smoke flavouring results from Maillard-type reactions between its carbonyl compounds (such as glycolaldehyde and methylglyoxal) and the free amino groups on the protein surface. This reaction is accelerated by heat; consequently, the drying, cooking or heating step that follows surface application is critical for colour development. Phenolic components (guaiacol, syringol) are the primary source of the smoky taste.
Uniform colour formation on cheese depends on the moisture level of the surface. A wet surface may cause the flavouring to run and create streaking, while an excessively dry surface can lead to poor adhesion. For this reason, product temperature, surface moisture and contact time must be optimised together in surface applications.
Applications
- Smoked semi-hard cheeses and sliced smoked cheese (surface application)
- Smoked processed cheese and spreadable cheeses (mass addition)
- Analogue cheese and plant-based cheese alternatives
- Meat products (sucuk, salami, smoked meat products)
Advantages
- Flavour and colour delivered from a single product
- Controlled and reproducible smoked appearance without the need for a smoking chamber
- Elimination of smoking time and the associated weight loss
- Flexibility to choose between surface application and mass addition for managing both external appearance and internal flavour
Usage and dosage
Smoke flavourings are high-intensity products; the usage rate is determined according to the application method and the conditions stipulated by the relevant legislation for the product category. Product-specific dosage information is provided in the technical data sheet.
- Surface application: The diluted flavouring is applied by dipping, spraying or atomisation (misting), followed by drying or heat treatment to develop colour. The dilution ratio is adjusted according to the desired colour intensity.
- Mass addition: In processed cheese, the flavouring is diluted with water and added to the cooker along with the other ingredients before heating.
- Application equipment must be made of materials resistant to the acidic nature of the flavouring components (stainless steel, suitable plastics).
Optimum dosage should be determined through pilot trials based on the raw materials and formulation.
The technical data sheet (TDS) is available upon request.
Regulatory information
Smoke flavourings are regulated in Turkey under the Turkish Food Codex Regulation on Flavourings and Food Ingredients with Flavouring Properties, and in the EU under Implementing Regulation (EU) 1321/2013. Under EU Regulation 2024/2067, the authorisation of certain primary smoke products has not been renewed; a transitional period until 1 July 2029 has been granted for traditionally smoked cheese, meat and fish products. Manufacturers exporting to the EU market should verify which primary smoke product their flavouring is derived from by consulting the technical dossier.
Frequently asked questions
What is the difference between Smoke Flavour 10E and Smoke Flavor P75?
Smoke Flavour 10E is positioned for applications where a pronounced smoked colour contribution alongside aroma is desired, including surface application. To determine which product best suits your formulation, please consult our technical team based on your application method.
Why is the surface colour uneven?
Uneven colour typically results from non-uniform surface moisture, products touching each other, or uneven temperature distribution during the colour development step. Surface moisture and heat treatment profile should be adjusted together.
Can the label state "natural smoke"?
Smoke flavourings must be declared as "smoke flavouring" in the ingredient list; they are not classified as natural flavourings. Labelling claims should be based on the applicable legislation.
To determine dosage, dilution and colour development conditions for surface application or mass addition, you can request samples and application support from the Technofood technical team.
Applications
HARD AND SEMI-HARD CHEESES · SPREADABLE CHEESES · SAUCES · VEGAN CHEESES · FLAVOURS AND FLAVOUR ENHANCERS
