PROMEL SPC 14 – Cream Cheese and Sauce Stabiliser
Technofood093

PROMEL SPC 14

PROMEL SPC 14 is a stabiliser blend that creates a creamy, smooth texture in cream cheese, spreadable processed cheese and cheese sauces, limits syneresis and provides heat treatment stability.

Product description

PROMEL SPC 14 is a powdered stabiliser blend designed for the spreadable cheese category. It is used as a texture improver in the production of cream cheese, spreadable processed cheese (tub and triangle formats) and cheese sauce. When the dry matter and fat content in these products is reduced or the protein source is changed (milk powder, casein, whey protein), the body weakens, spreadability deteriorates and syneresis occurs in the package. SPC 14 is formulated to compensate for these losses.

Unlike CS 30 from the same product family, which targets fluid sauces, SPC 14 focuses on spoonable and spreadable cheese textures: the goal is a body that is firm when cold yet spreads easily on bread and melts smoothly on the palate.

Technical function and working principle

In spreadable cheeses, texture is formed by a network of protein dispersed by emulsifying salts and emulsified fat droplets. As creaming progresses the protein network thickens; however, if the protein level is low, this network cannot retain sufficient water. The stabiliser components bind water in the continuous phase to increase viscosity, interact with the protein network to reinforce the structure and limit syneresis during storage. Scientific studies have demonstrated that galactomannan-type gums (locust bean gum, guar gum) and thickeners such as xanthan gum reduce syneresis in cream cheese and improve spreadability.

In cheese sauce, the same mechanism helps prevent viscosity loss and oiling-off upon reheating.

Applications

  • Cream cheese and cream cheese-type products
  • Spreadable processed cheese (tubs, cups, triangle portions)
  • Cheese sauce and cheese-based fillings
  • Hot-filled spreadable products

Benefits

  • Smooth, creamy and glossy texture
  • Reduced syneresis and surface moisture during cold storage
  • Body support in low-fat and low dry matter formulations
  • Maintained flowability during hot filling and spreadable consistency upon cooling
  • Consistent texture in formulations with partially substituted protein sources

Usage and dosage

To prevent lumping, the product should be pre-blended with emulsifying salt, salt or milk powder before being added to the processed cheese cooker or mixer. In spreadable cheese and cream cheese applications, stabiliser blends are typically used at 0.3–1% of the finished product; the exact rate depends on the fat, dry matter and protein levels. The product must be held at cooking temperature for a sufficient time to ensure full hydration of the hydrocolloids.

Optimum dosage should be determined by pilot trials based on the raw materials and formulation. Usage must comply with the conditions set for the relevant category in the Turkish Food Codex Food Additives Regulation.

Technical specifications

The technical data sheet (TDS) is available on request.

Packaging and storage

PROMEL stabiliser series products are supplied in 25 kg kraft bags. Store in a cool, dry place, sealed and away from strong-smelling materials. The product is hygroscopic; once opened, protect from moisture.

Frequently asked questions

What is the difference between SPC 14 and CS 30?

CS 30 is a system containing modified starch and emulsifier, designed for heat stability and fat stability in fluid cheese sauces. SPC 14 targets a creamy, spreadable texture in cream cheese and spreadable processed cheese but can also be used in sauce applications.

Should the dosage be increased if moisture appears on the product surface?

First check the degree of creaming, pH and filling temperature. If these parameters are in order, a gradual increase in dosage will reduce syneresis; however, excessive dosage may result in a rubbery texture.

What should be considered during hot filling?

The product must be held at cooking temperature long enough to fully hydrate the stabiliser, and the filling temperature should be kept constant according to the formulation. Rapid cooling after filling balances crystallisation and structure formation; slow cooling may lead to excessive creaming and hardening.

Can it be used in acidified (fermented) cream cheese?

Cream cheese pH generally ranges from 4.5 to 5.0; the gum components remain functional within this range. Nevertheless, preliminary trials are recommended for fermented and hot-filled products.

To evaluate texture and water binding issues in your spreadable cheese or sauce formulation, contact our technical team and request a PROMEL SPC 14 sample.

Applications

SPREADABLE CHEESES · SAUCES

Would you like more information about our products?

Contact us